Pfaff 1591

Input
57
11.01.03 Seam program input via the “Teach-in” function
This function is used to create the seam program by stitching a sewing pattern. A new crea-
tion is always made, meaning that when selecting an already existing program it is overwrit-
ten.
 Switch the machine on.
 Select a program number from 3 - 49, see chapter 9.06 Selecting a program number.
 Call up input mode.
 Call up the “Teach-in” function.
 Select the desired program number or enter it via the keypad.
 Conclude with the “Enter” function.
 Call up the comment input menu.
 Enter a comment via the keypad and numeric keypad.
 Conclude the comment input.
The following displays and functions appear on the display before sewing:
 Defi ne the feed motion for the feed wheel
This is used to display and change the current values for the feed motion of the feed
wheel.