Input
56
Defi ne the feed motion for the feed wheel
This is used to display and change the current values for the feed motion of the feed
wheel.
Defi ne the feed motion for the roller presser
The difference with respect to the feed motion of the feed wheel (basic stitch length) de-
termines the fullness.
The current seam program can be rolled through via the functions.
The current seam zone is displayed accordingly alongside all other current values.
Opens the menu for entering the seam start, see chapter 9.08 Entering start and end
backtacks.
Or insert the seam zone.
The current seam zone is copied and all subsequent seam zones are set backwards.
Or delete the current seam zone.
Defi ne seam or programming end.
Complete the fi rst seam zone and change to the next seam zone.
End the input and change to programmed sewing.
To Next Page
Loading...
