Pfaff 1591 User Manual

Set-up and Initial Start-up
27
8.02.05 Machine drive home position / fi tting the toothed belt
 Switch the machine on.
 Call up input mode.
 Call up the service menu.
 Enter the code number, see chapter 9.10 Entering / changing the code number.
 Turn the motor shaft by hand until the display shows the value “11” under “POS”.
 Turn the handwheel in the direction of rotation until the needle point (approaching from
above) is on the upper edge of the needle plate.
 Fit the toothed belt 5 while making sure that both the motor shaft 4 (Fig. 8 - 08) and the
machine are not twisted.
11

Pfaff 1591 Specifications

General

Brand	Pfaff
Model	1591
Category	Sewing Machine
Language	English