Input
54
Or input or change a comment.
Pressing the symbol opens a menu to save the program under a new program number.
End the input of the basic settings and change to the input of the seam zones,
see chapter 11.01.02 Seam zone input via the “Create/correct program” function or
chapter 11.01.03 Seam program input via the “Teach-in” function.
The input can also be concluded by calling up the sewing mode. This function is
used to conclude the seam program input and the machine switches to the pro-
grammed sewing mode.
Defi ne the feed motion for the feed wheel as a basic stitch length.
To Next Page
Loading...
Need help?
General
