P45 PD2 Input
47
Group
Parameter
Description
User level
Setting range
Set value
6
605 Actual speed value in display
ON = on, OFF = off
B ON - OFF OFF
606 Minimum speed B 120 - 800 180
607 Maximum speed B 300 - 3000
▲
608 Speed stage curve (pedal characteristic)
0 = 12 stages non-linear
1 = 12 stages linear
2 = 24 stages non-linear
3 = 24 stages linear
4 = stages 1..8 minimum speed,
stages 9...24 linear
B 0 - 4 1
609 Trimming speed 1 B 100 - 700 180
615 End recognition with light barrier
ON = from bright to dark
Off = from dark to bright
B ON - OFF OFF
618 Return after seam end
ON = yes, OFF = no
B ON - OFF ON
623 Switch-on delay for return in [ms] B 50 - 900 100
636 Thread tension release in conjunction with
presser foot lift
ON = yes,
OFF = no
B ON - OFF OFF
642 Presser foot lift time from switch-on to ten-
sion reduction
B 10 - 150 100
643 Feed adjustment time from switch on to ten-
sion reduction
B 10 - 150 100
653 Bearing position before sewing
ON = yes,
OFF = no
B ON - OFF OFF
660 Bobbin thread monitoring
0 = off,
1 = not used
2 = by stitch counting
A 0 - 2 0
665 Lock/stop when
ON = contact closed
OFF = contact open
B ON - OFF ON
▲ = See Chapter 3 Specifi cations of the Instruction Manual for the machine
To Next Page