52AutomaticOperationFeatures
Automatic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape's record tab is missing,playback will
begin.If a timer recording is set, the power will not come on auto-
matically when you insert a tape with the record tab intact.If a
timer recording is set and the TV/VCR power is off, the TV/VCR
will eject the tape if the record tab is missing.
Automatic Rewind, Eject, Off
When a tape isplayed,fast forwarded, or recorded to its end,the
TV/VCR will rewind the tape, stop, turn itself off,and eject the
tape. If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real-time counter isset
to zero.The TV/VCR will not turn itselfoff or eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind-
ing aJ_ape,REW • POWER OFF will appear on the screen. The
TV/VCR will turn itself off when the tape hasfinished rewinding.
If a real-time counter memory is set, the TV/VCR may only rewind
the tape to the point at which the counter was set to zero, then
turn itself off.
Tape Eject
A tape can be ejected with theTV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjuststhe tracking to give you the
best possible picture quality. With some recordings, however, you
mayget a better picture usingthe manual tracking controls (see
below).
Manual Tracking
To adjust the tracking manually,press the CHANNEL A/_ but-
tons on theTV/VCR or the TRACKING _/' buttons on the
remote control.
Tracking returns to Automatic Tracking Adjustment when a tape is
inserted or when the STOP/_ button is pressed.
e,ore
Tracking Tracking
Adjustment Adjustment
_m
To Next Page
Loading...
