User Manual Philips MultiOne
© Philips Lighting B.V. 2014 Page 37 / 81
Use the slider or the text field to select a value. The value represents the start fade-up
time in milliseconds.
12.3.11 AmpDim
Product group
HID, LED
Description
Use this feature to adjust the light output of a lamp by adjusting the mains voltage of
the device.
Usage
Select the Enable check box to use this feature (note that LED devices do not have
this check box). Drag the points or the lines in the graph to create the desired
configuration. Alternatively, use the table to directly enter values.
NOTE: For a detailed technical description of the characteristics of the device model,
like constraints and limitations, please refer to Device-specific technical description.
To Next Page
Loading...