Philips MultiOne - Device-Specific Technical Descriptions; MultiOne Error Handling

User Manual Philips MultiOne
© Philips Lighting B.V. 2014 Page 71 / 81
Energy Meter
x
x
Lamp Burn-in
x
Lamp Selection
x
x
Light Source Operating
Hours
x
LineSwitch
x
x
LumiStep
x
Min Dim Level
x
Module Temperature
Protection
x
x
Quick Lamp Start
x
Summary
x
x
x
x
Touch and Dim
x
x
12.19 Device-specific technical descriptions
For a detailed technical description of the characteristics of the devices, please visit
the product-specific Philips web sites:
Table 4 Product-specific Philips web sites
Product group
Visit:
LED
www.philips.com/Xitanium
HID
www.philips.com/Xtreme
FLUO
www.philips.com/HFR-Intelligent
CONTROL
www.philips.com/Actilume
12.20 Error handling
12.20.1 Reporting and correction of errors/warnings when reading from a
feature configuration file
When, after opening a feature configuration file, incorrect parameters are detected,
MultiOne tries to correct these parameters for the selected (virtual) device. When a
correction is made, a red border will be shown. In cases when no logical correction
can be made, an orange border will be shown.
12.20.2 Reporting of errors when reading from a device
When after reading from a device a mismatch is signaled between the parameters of
the device and MultiOne, MultiOne will not correct the parameters, but will show a
red border.
12.20.3 Reporting of errors when entering incorrect values in a feature
Entering an incorrect value for a parameter will be indicated by a red border.