Philips MultiOne - Light Source Operating Hours; Lineswitch

User Manual Philips MultiOne
© Philips Lighting B.V. 2014 Page 48 / 81
Use Selection to select the lamp type. Note that this feature has to be read first in
order for the options to become available. To read the feature configuration, click
Read on the toolbar.
NOTE: after selecting a different lamp, it is necessary to switch the driver off for a few
seconds. After switching is on again the selected lamp is activated.
12.3.21 Light Source Operating Hours
Product group
LED
Description
Use this feature to manually set or reset the number of operating hours for the LED
module. This is useful when replacing the LED module, thereby resetting features like
Constant Light Output and End Of Life indication.
Usage
Use the slider or the text field to select a value. The value represents the number of
operating hours.
12.3.22 LineSwitch
Product group
HID, LED