Philips MultiOne - Page 58

User Manual Philips MultiOne
© Philips Lighting B.V. 2014 Page 58 / 81
A brief explanation of all HID diagnostics is given below.
Table 1 HID diagnostics
Diagnostic
Description
System starts
Number of times the HID driver was switched on (via
the mains).
System uptime (s)
Total time the HID driver was on.
Lamp uptime (s)
Total lamp burning time.
Ignition driver attempts
Number of times the HID driver attempted to ignite a
lamp.
Ignition lamp attempts
Number of times the HID driver attempted to ignite
the lamp, since last lamp replacement
a)
.
Failures
Total number of failures detected by the HID driver.
Total energy consumed
Total energy consumed by the HID driver.
Energy consumed
(resettable) (Wh)
Energy consumed since last user-reset.
24H reset expirations
HID driver was operating for more than 24 hours; any
failures blocking driver to operate the lamp are cleared
Thermal Guard Protection
Thermal Guard activated as a consequence of high
temperature level.
EOL driver incandescence
failures
End-Of-Life situation showing incandescent mode of
operation of the lamp.
EOL lamp incandescence
End-Of-Life situation showing incandescent mode of