Philips Sonicare DiamondClean Smart 9400 - Battery status; Battery status (handle on plugged in charger;charging travel case); Battery status (when handle is not placed on charger;charging travel case)

21
English
3
Place the handle in the travel case. The travel case
charges your toothbrush until your toothbrush is fully
charged.
Battery status
Battery status (handle on plugged in
charger/charging travel case)
Handle on plugged in charger/charging travel case:
When the handle is placed on the charger or in the
charging travel case, the battery indicator shows the
battery level.
Battery status Battery indicator
Charging Flashes white
Full Solid white for 30 seconds and then
switches off
Battery status (when handle is not placed on
charger/charging travel case)
Handle is not placed on charger/charging travel case:
When the toothbrush is awake, the battery indicator at
the bottom of the handle shows the battery level.
Battery status Battery indicator Sound
Full Solid white -
Partially full Flashes white -
Low Flashes amber The handle emits 3
beeps after brushing
Empty Flashes amber The handle emits 2 sets
of 5 beeps after
brushing
Note: To save energy, the battery indicator will switch off
when not in use.