PSR-TRISAFE-S
4-4
PHOENIX CONTACT 103503_en_03
5. Hardware editor
The hardware editor contains a graphical representation of the PSR-TRISAFE-S safety
module. When configuring the safety logic, input and output signals can be moved from
here to the connection editor using drag & drop. Double-clicking on the hardware editor
starts the safe device parameterization editor (not shown in the figure).
6. Status bar
When working with the configuration software, the status bar displays messages and
information, as well as the current logon status, the status of the safety module, and
transmission progress when downloading or uploading the configuration to or from the
safety module.
The following windows and dialog boxes are not visible in the figure:
– Message window
The message window can be used to track the progress of the project checking
function. When the check is started, the message window opens automatically. If the
system detects an error when checking the project, the relevant error location can be
accessed directly by double-clicking with the left mouse button on the message in the
message window.
– Assignment list for signals
The assignment list contains the signal assignments for the individual inputs and
outputs of the PSR-TRISAFE-S safety module. It provides "wiring documentation",
which makes the project easier to understand, and helps to prevent incorrect
connections being established in the connection editor.
– Project information dialog box
This dialog box can be used to enter and display the most important information for the
current configuration project (e.g., project-related data, manufacturer data, operator,
installation location, data relating to safety inspections, revision history for the project).
To Next Page
Loading...
Need help?
General
