Phoenix Contact PSR-TRISAFE-S User Manual

Problems and solutions
103503_en_03 PHOENIX CONTACT 7-5
7.5 Safety module messages
Table 7-5 Solutions for PSR-TRISAFE-S safety module messages
Problem Solution
Following acknowledgment of the newly
loaded configuration, the safety module is
not initialized correctly ("Controller: Error" in
the status bar and flashing "ERR" status
indicator on the safety module).
1. Switch the safety module off and on
again.
2. Download the project to the safety
module again and acknowledge the
new configuration by pressing the
"Confirm" button on the device.
3. If the problem persists, please contact
our technical support team.
The safety module reports an internal error. Please contact our technical support team.

Phoenix Contact PSR-TRISAFE-S Specifications

General

Brand	Phoenix Contact
Model	PSR-TRISAFE-S
Category	Control Unit
Language	English