Phoenix Contact PSR-TRISAFE-S User Manual

103503_en_03 PHOENIX CONTACT A-3
A.2 Index
Numerics
35 mm DIN rail ......................................................... 3-14
A
Alarm outputs M0 - M3............................... 3-1, 3-9, 4-13
Antivalent (safe functional block) ............................... 4-6
Application example
Application examples for the individual functional
blocks................................................................... 6-1
Cross-circuit detection.......................................... 2-8
Ground switching outputs O0-, O1- .................... 3-10
Restart inhibit ....................................................... 2-6
Startup inhibit ....................................................... 2-6
Stop category 0 .................................................... 2-6
Assignment list........................................................... 4-2
Assignment list (SAFECONF) .................................. 4-19
C
Cable lengths to sensors/control devices................. 3-17
Category 4 according to DIN EN ISO 13849 .............. 1-4
Check values (CRC) ................................ 4-18, 4-20, 5-7
Checking and downloading the project 4-18, 5-1, 5-2, 5-5
Communication between the PSR-TRISAFE-S and
SAFECONF ...................................................... 2-2, 3-11
Configuration project, see Project
Connecting objects in the connection editor............. 4-14
Connection editor 2-2, 2-11, 3-7, 4-3, 4-11, 5-1, 5-10, 7-2
Connections on the PSR-TRISAFE-S ........................ 3-7
Controller password, see Password protection
Creating a project.............................................. 4-10, 5-1
Cross-circuit detection ....... 1-2, 2-8, 3-8, 3-9, 4-13, 4-16
Cross-circuit protection ............................................ 3-10
D
Device parameterization editor .................. 2-8, 4-15, 7-2
Diagnostics
Hardware diagnostics........................................... 2-9
Online tool tips.................................................... 2-12
Status indicators................................................. 2-12
Wiring check....................................................... 2-11
DIN rail connector, see PSR-TBUS DIN rail connector
DIN rail, see 35 mm DIN rail
Directives ................................................................... 1-5
Documentation........................................................... 1-8
Documenting the signal assignment of the project... 4-19
Downloading the configuration using the IFS-CONFSTICK
5-7
Downloading the project using the IFS-CONFSTICK. 5-7
Dual signals ............................................. 3-7, 4-11, 4-13
E
EDM (safe functional block) ................................ 2-6, 4-6
Electrical safety.......................................................... 1-3
EMC Directive 2004/108/EC ...................................... 1-5
EmergencyStop (safe functional block)............... 2-6, 4-6
EnableSwitch (safe functional block) .................. 2-6, 4-6
Equivalent (safe functional block) .............................. 4-6
Error detection ........................................................... 1-2
ESPE (safe functional block)...................................... 2-6
Expert mode (EASYSIM simulation) .......................... 5-2
F
Forcing........................... 3-11, 4-2, 4-21, 4-22, 5-2, 5-12
Forcing signals, see Forcing
Function test .............................................. 5-2, 5-7, 5-10
Functional blocks with startup or restart inhibit........... 2-6
Functional blocks/functions, safe ................. 1-7, 4-5, 6-1
Functions/functional blocks, safe ................. 1-7, 4-5, 6-1
G
Ground switching outputs O0-, O1-.......... 3-1, 3-10, 4-17
GuardLocking (safe functional block).................. 2-6, 4-7
GuardMonitoring (safe functional block) ............. 2-6, 4-7
Guideline for test and certification GS-ET-26............. 1-5
H
Hardware diagnostics ................................................ 2-9
Hardware editor . 2-8, 3-7, 4-2, 4-4, 4-11, 4-15, 5-1, 5-10
I
IFS-CONFSTICK ......................... 2-2, 3-6, 3-12, 5-4, 5-7
Downloading the configuration to the PSR-TRISAFE-S
using IFS-CONFSTICK ........................................ 5-7
Inserting functional blocks in the connection editor.. 4-11
Inserting functions in the connection editor .............. 4-11

Phoenix Contact PSR-TRISAFE-S Specifications

General

Brand	Phoenix Contact
Model	PSR-TRISAFE-S
Category	Control Unit
Language	English