Pioneer F900BT - AVIC - Navigation System - Memorize the current song; Recalls equalizer curves; Displaying the “Function” menu; Recalling channels from the preset

ALL CH MODE
a98
23
1
4
5
6
7
b
CATEGORY MODE
1
23
c
5
6
7
ba98
1 Memorize the current song
= For details, refer to Memorizing the song
on the next page.
2 Recalls equalizer curves
= For details, refer to Recalling equalizer
curves on page 140.
3 Displaying the “Function” menu
= For details, refer to Using the “Function”
menu on page 112.
4 Recalling channels from the preset
Touch to recall the preset channel.
5 Perform manual tuning
The channels move up or down one at a
time.
p If you keep touching [c]or[d] you can
skip the broadcasting channels.
6 Select an XM band
Touch [Band] repeatedly until the desired
XM band is displayed: XM 1, XM 2 or
XM 3. This is useful for switching the preset
item.
7 Displaying the map screen
8 Preset key for receiving the traffic
audio service
= For details, refer to Using the direct traffic
announcement function on page 112.
9 Switching the XM channel select mode
You can switch the mode between the two
methods for selecting and listing the chan-
nel.
ALL CH MODE :
You can select a channel from all channels
when you operate this function.
CATEGORY MODE:
You can select a channel within a selected
category that you operate this function.
a Selecting an XM channel directly
= For details, refer to Selecting an XM chan-
nel directly on this page.
b Switching to the list display
You can select the desired channel from the
list display.
= For details, refer to Selecting a channel
from the list on the next page.
c Switching the channel category
Touch [c]or[d] to select the desired cate-
gory.
Selecting an XM channel directly
You can select an XM channel directly by en-
tering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers, touch [Clear].
3 While the input number is displayed,
touch [Enter].
The XM channel that was entered is selected.
4 Touch
.
You return to the previous display.
Displaying the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
Using the XM tuner
En
110
Chapter
21