The external unit can be operated by trans-
mitting the operating commands set to 1
key — 6 key.
p Operation varies depending on the exter-
nal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
7 Operate the external unit by using F1 —
F4
The external unit can be operated by trans-
mitting the operating commands set to F1
— F4.
p The operating commands set to F1 —
F4 vary depending on the external unit.
p Some functions may not be used until
you touch and hold the key.
Using the exter nal unit (EXT1, EXT2)
En
122
Chapter
24
To Next Page
Loading...
