To Next PageTo Next PageWhy is there no picture on my Pioneer PDP-5000EX Monitor?
If there is no picture on your Pioneer Monitor, verify that the connection to other components is correct. Also, ensure that the Input Select setting is correct and that a non-compatible PC signal is not being input.
How to troubleshoot no power on a Pioneer PDP-5000EX?
If you're not getting any power to your Pioneer Monitor, check if the power cord is disconnected and ensure that the main power is turned on.
Why does my Pioneer Monitor power off suddenly?
If your Pioneer Monitor is suddenly turning off, it might be due to an increase in the Plasma Display's internal temperature. Ensure that you remove any objects blocking the vent or clean it. Alternatively, check the power control setting.
How to fix a Pioneer PDP-5000EX Monitor remote control that is not working?
If your Pioneer Monitor's remote control isn't working, make sure the batteries are correctly inserted with the proper polarity (+, –). If they are, try replacing them with new batteries. Also, ensure you're pointing the remote control unit directly at the remote control sensor on the Plasma Display and you are not using it under strong or fluorescent lighting. Check if a fluorescent light is illuminated to remote control sensor.
What to do if my Pioneer Monitor has images but no audio?
If you're getting images but no audio output from your Pioneer Monitor, first check if you've accidentally selected the minimum volume or muted the sound. Also, when using INPUT1, INPUT4, INPUT5, or INPUT6 as the input source, make sure that the audio connectors have been properly connected.
What to do if my Pioneer Plasma Monitor cannot be operated?
If your Pioneer Plasma Display cannot be operated, it might be due to external influences like lightning or static electricity. Try turning off the power to the Plasma Display, or unplug the power cord and re-plug it in after 1 or 2 minutes, then operate the Plasma Display.
How to fix strange color on Pioneer PDP-5000EX?
If you're experiencing strange color, light color, dark or color misalignment on your Pioneer Monitor, try adjusting the picture tone. If the room is too bright, the picture may look dark. Also, check the color system setting.
Why is the picture cut off on my Pioneer Monitor?
If your Pioneer Monitor's picture is cut off, ensure the image position is correct and the correct screen size has been selected.
How to resolve after-image lag on Pioneer PDP-5000EX Monitor?
If you are experiencing after-image lag on your Pioneer Monitor, playing a rather bright moving image for several minutes may rectify this. Keep in mind that displaying a still image for excessively long periods of time may cause permanent display deterioration.
What to do if there is no image and audio presented on Pioneer Monitor?
If there is no image and audio presented on your Pioneer Monitor, check the cable connection with the other equipment.
General| Depth | 98 mm |
|---|---|
| Width | 1282 mm |
| Height | 750 mm |
| Weight | 39800 g |
| Pixel pitch | - mm |
| Product color | Black |
| Audio (L/R) in | 1 |
| Noise reduction | Yes |
| RMS rated power | 13 W |
| Display diagonal | 50 \ |
| Display brightness | 1000 cd/m² |
| Display technology | Plasma |
| Power requirements | AC 110 - 240 V, 50/60 Hz |
| Contrast ratio (typical) | 3000:1 |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 420 W |
