Internet Telephony PBX System
IPX-2500
Chapter 2 Installation Procedure
2.1 Web Login
Step 1. Connect a computer to an LAN port on the IPX-2500. Your PC must set up to the
same domain of 192.168.0.X as that of the IPX-2500.
Step 2. Start a web browser. To use the user interface, you need a PC with Internet Explorer
(version 6 and higher), Firefox, or Safari (for Mac).
Step 3. Enter the default IP address of the IPX-2500: 192.168.0.1 in the URL address box.
Step 4. Enter the default user name admin and the default password admin, and then click
Login to enter Web-based user interface.
(Default IP)
Default WAN IP: 172.16.0.1
Default LAN IP: 192.168.0.1
Default User Name: admin
Default Password: admin
Figure 2-1. Login page of the IPX-2500
For security reason, please change and memorize the new password after this first
setup.
17
To Next Page
Loading...
