Internet Telephony PBX System
IPX-2500
3.4.4 Ring Groups
Ring Group is a collection of extensions. When a call to a ring group is made, all extensions in
this ring group will ring in different ways based on their different configurations. If ring time
exceeds a defined time, the call will be directed to IVR or others based on your configuration.
There isn't any data in the factory default 【Ring Groups】, please configure it here.
Click【Inbound Control】-> 【Ring Groups】->【New Ring Group】:
Item Explanation
Name Define a name for the Ring Group.
Strategy Select “Ring All” or “Ring in order”.
Ring Group Members Select the Ring Group Member from “the Available Channels”,
click
to add.
If not answered You can choose to forward the call to extension, voicemail, ring
group, IVR or hang up if not answered.
38
To Next Page
Loading...
