Planet IPX-2500 - 4.14 Feature Codes

Internet Telephony PBX System
IPX-2500
4.14 Feature Codes
Click【Feature Codes】to display the dialog as shown below. You can define relevant
parameter.
Item Explanation
Extension to Dial for
Parking Calls
Define an extension for parking calls.
Extension Range to Park
Calls
Define the extension range for parking calls. (e.g. 701-720)
Call Parking Time(sec) Define the time for parking calls. Planet IP PBX will call the extension
again if parking is over time.
Pickup Extension Define an extension for pickup.
Pickup Specified
Extension
Pick up the specified extension. Default: Dial**+extension number to
pick up the specified extension
Blind Transfer Allow unattended or blind transfers. It works like this: While on a
conversation with A, you dial the blind transfer key sequence. The
system says "Transfer" then gives you a dial tone, while A is on hold.
You dial the transferee number (B's number) and A is put through to
B immediately. Your line is off. The caller ID displayed to B is exactly
the same as the caller ID presented to you.
Attended Transfer Allow attended transfer or supervised transfer. It works like this:
While on conversation with A, you dial the Attended Transfer key
69