Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
BSP-360
43
Object Description
System Information
Firmware Version
Displays the current firmware version of Renewable Energy Switch.
Operation Mode
Displays the current operation mode.
System Temperature
Displays the current system temperature of Renewable Energy Switch.
System Time
Displays the current system date of Renewable Energy Switch. The
system date will be correct if NTP function is enabled and the Hub is
connected to Internet.
Device Description
Displays the current device description and can be configured for user
definition.
Network Information
Attain IP Protocol
Displays the currently attained IP protocol of Renewable Energy Switch.
IP Address
Displays the current IP address of Renewable Energy Switch.
Subnet Mask
Displays the current subnet mask address of Renewable Energy Switch.
Default Gateway
Displays the current gateway address of Renewable Energy Switch.
DHCP Server
IP address of DHCP Server.
MAC Address
Displays the MAC address of Renewable Energy Switch.
Power Information
Version
Displays the current Charge Board firmware version of Renewable Energy
Switch.
Battery Type
Lead-acid battery or Lithium battery.
Battery Capacity
Displays the capacity of battery.
Install Time of Battery
Displays the install time of battery.
Go to the Battery management to enter the install time.
Battery Life
Displays the life of battery.
Go to the Battery management to enter the life.
PV In
Displays the voltage, current and watt of PV in.
Power Information
Displays the voltage, current and watt of the system.
Battery In
Displays the voltage, current and watt of battery in.
Battery Capacity Status (%)
Displays the status of battery.
Table 4-3-1: Descriptions of the System Information Objects
To Next Page
Loading...
Need help?
General
