Planet Switch - DATA out Poe Injector RJ45 Port Pin Assignments; MID-Span PD

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
BSP-360
79
A.3 DATA OUT PoE Injector RJ45 Port Pin Assignments
PIN NO 10BASE-T
100BASE-TX
1000BASE-T
1
TX+ DC- DA+ DC-
2
TX- DC- DA- DC-
3
RX+ DC+ DB+ DC+
4
- DC+ DC+ DC+
5
- DC+ DC- DC+
6
RX- DC+ DB- DC+
7
- DC- DD+ DC-
8
- DC0 DD- DC0
A.4 RJ45 Pin Assignment of Non-802.3af/802.3at Standard PD
with PoE Mid-span PD
Pin out of Cisco non-
802.3af standard
PD
Pin out of POE Mid-span
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
Before you power PD, please check whether the RJ45 connector pin assignment follows IEEE 802.3af/IEEE
802.3at standard; otherwise, you may need to change one of the RJ45 connector pin assignments, which is
attached with the UTP cable.