14 SETTINGS
User’s Manual Planmeca ProOne 75
14.1.2 Selecting language (U1200)
To change the language of the control panel displays, first
select the option
Select language (U1200)
on the
User
settings
display. The
Select language (U1200)
display will
appear.
Select the language of your choice. The selected
language will be shown highlighted.
Accept your selection by touching the green check mark
button in the bottom right corner of the display. To exit the
display without saving the changes, touch the red cross
button in the bottom left corner of the display.
To Next Page
Loading...
