Planmeca Viso - Planmeca Viso Cleaning and Disinfection; Cleaning Patient Supports, Handles, and Touch Screen

16 Cleaning and disinfection
For Planmeca approved cleaning agents and disinfectants, see document
Planmeca approved disinfectants (30025870). The document can be found
in the Planmeca Material bank.
NOTE
Switch the X-ray unit off before cleaning and disinfection.
NOTE
Use a Planmeca approved cleaning agent and surface disinfectant. The
products are categorised as cleaning agents and / or disinfectants according
to the information provided by the manufacturers.
NOTE
Follow the instructions provided by the manufacturer of the cleaning agent,
disinfectant and autoclave.
NOTE
FOR SPRAYS, LIQUIDS AND FOAMS:
Do not apply sprays, liquids or foams directly on the surfaces. Apply
sparingly to a clean soft cloth and wipe the surface with the cloth.
Contact your service technician for help if sprays, liquids or foams enter the
system.
16.1 Patient supports, patient handles and touch screen
Wipe these parts after each patient using a Planmeca approved surface
disinfectant.
Use a Planmeca approved cleaning agent for cleaning stains and dirt if
needed.
16 Cleaning and disinfection
User's manual Planmeca Viso 97