15 Error messages
NOTE
Contact your service technician for help if you receive an error message.
The X-ray unit incorporates a self-checking feature that monitors the
operation of the unit. If the system detects a technical fault, an error
message (e.g. E201) appears on the control panel.
An error message indicates that the X-ray unit has a problem that needs
to be solved before further exposures can be taken. The X-ray unit will not
accept any commands from the user until the error message is cleared.
Guide the patient away from the X-ray unit. Then clear the message by
selecting the green check mark button.
15 Error messages
96 Planmeca Viso User's manual
To Next Page
Loading...
