The revised exposure values are then used in performance of next
exposure.
13.1.6 Licences (1700)
About this task
Follow the steps below to activate a program licence.
Steps
1. Select User > 1700 Licences.
2. Select the licences you wish to activate.
3. Enter the licence code that you have received for this licence on this
X-ray unit.
4. Select the green check mark button.
5. Repeat for another program licence if needed.
6. Select the green check mark button.
13 Settings
User's manual Planmeca Viso 89
To Next Page
Loading...
