11.3 Patient positioning
Steps
1. Guide the patient to the X-ray unit when you see this message.
NOTE
The message does not display if the fast forward option is selected.
The patient can sit or stand during the exposure.
NOTE
We recommend that you image patients with poor health in a sitting
position.
2. Use the height adjusting slider on the touch screen to move the X-ray
unit up or down until the chin cup is approximately level with the patient’s
lower jaw.
3. Ask the patient to grasp the patient handles.
11 3D exposure
54 Planmeca Viso User's manual
To Next Page
Loading...
