Trouble-
shooting
TR-4-13
28 May 2009
TR-502
Fault Code TR-502, indicates that the blowers (TR-M5/M6) do not respond.
Initial Actions
Check placement of blowers.
Make sure blowers are installed correctly.
Procedure
Enter the Service mode and select blowers Trimmer (TR-M5/M6) in check motors. Do the blowers work?
Y N
Go to TR-014 fault code.
Replace PCB.
TR-503
Fault Code TR-503, indicates that the stacker is full.
Procedure
Empty stacker. Fault still appears?
Y
Go to TR-017 fault code.
To Next Page
Loading...