6.38
CLUTCH SYSTEM
Belt burnt, thin spots
-Abuse (continued throttle application when
vehicle is stationary, excess load)
-Caution operator to operate machine within
guidelines.
-Dragging brake
-Vehicle operated with park brake on. Inspect brake
system.
-Slow, easy clutch engagement
-Instruct firm, effective use of throttle for efficient
engagement.
PVT noise
-Belt worn or separated, thin spots, loose
belt
-Replace belt.
-Broken or worn clutch components, cover
hitting clutches
-Inspect and repair as necessary.
Engagement
erratic or “jerks”
-Thin spots on belt, worn belt
-Replace belt. Refer to belt burnt troubleshooting and
instruct operator.
-Drive clutch bushings stick -Inspect and repair clutches.
Table 6-2: Problem, Cause and Remedy
SITUATION POSSIBLE CAUSE REMEDY
To Next Page
Loading...
Need help?
General
