11.106
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
2. Connect SmartLink Module cables to PC and vehicle.
See “Digital Wrench® - Diagnostic
Connector”page 11.103
3. Open the Digital Wrench® program.
4. Select the model year, product line and vehicle
description by selecting the “Change Vehicle Type”
icon.
5. Select the “Special Tests” icon.
6. Select “Engine Controller Reprogramming”.
7. Select the file you want to load into the ECU then
click the “Continue” icon to proceed to the Integrity
Check and obtain a Request Code.
8. Copy (CTRL +C) the Request Code that will be
required on the dealer website in the next step. DO
NOT CLOSE Digital Wrench® or the Request Code
will be invalid. NOTE: All characters are letters;
there are no numbers in a request code.
NOTICE
Request Codes and Authorization Keys must be
entered EXACTLY as they appear on the screen.
ELECTRICAL
To Next Page
Loading...
Need help?
General
