11
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
11.107
9. Go to www.polarisdealers.com and click on “ReFlash
Authorization” from the “Service and Warranty” drop-
down menu.
10.Enter or paste (CTRL+V) the Request Code into the
box.
11. Select the same file type from the list that you
selected previously while in Digital Wrench®. Enter
the VIN along with the customer’s name and address.
When completed, click the Authorize button once to
proceed.
12.An “Authorization Key” will appear in the upper left
corner of the screen. Copy (CTRL+C) this key exactly
as it appears.
13.Enter or paste (CTRL+V) the Authorization Key in the
box located on the Digital Wrench® screen. Click the
‘Continue’ button and follow instructions provided on
the screen to complete reprogramming procedure.
14.At this point the reflash process will begin. Do not
touch the vehicle or PC during the process.
15.Once the ECU reprogramming procedure is
complete, click the ‘Finish’ button on the screen.
Verify the reflash was a success by starting the
vehicle.
ELECTRICAL
To Next Page
Loading...
Need help?
General
