6.13
BRAKES
draining from brake line.
2. Push pad retainer pin inward and slip brake pads past the
pin edges. A pliers may be used to compress the pad
retainer for removal if the pads are too thick. Use caution
not to bend or damage the retainer or the brake pad ears.
3. Remove mounting bracket pin assembly .
4. Remove piston using a twisting, pulling motion. Remove
the piston square seals using a wooden or plastic pick. Use
caution not to scratch or damage the piston or the bore of
the caliper.
NOTE: Do not use a metal pick or awl to remove the
square seals.
The use of compressed air may be
required to remove the piston.
CAUTION
Always wear eye protection
when using compressed air.
To Next Page
Loading...
Need help?
General
