MAINTENANCE
2.8
POLARIS LUBRICANT SYMBOL IDENTIFICATION
NOTE: The symbols are used to properly identify the correct lube or grease to use in the maintenance section.
VEHICLE INSPECTION / MAINTENANCE
PRE-RIDE / DAILY INSPECTION
Perform the following pre-ride inspection daily, and when servicing the vehicle at each scheduled maintenance.
• Tires - check condition and pressures
• Fuel and oil - fill both to their proper level; Do not overfill
• All brakes - check operation(includes auxiliary brake)
• Throttle - check for free operation
• Headlight/Taillight/Brakelight - check operation of all indicator lights and switches
• Engine stop switch - check for proper function
• Wheels - check for loose wheel nuts
• Air cleaner element - check for dirt or water; clean or replace
• Steering - check for free operation, noting any unusual looseness in any area
• Loose parts - visually inspect vehicle for any damaged or loose nuts, bolts or fasteners
• Engine coolant(if applicable) - check for proper level at the recovery bottle
Polaris DOT 3
Brake Fluid
Polaris Synthetic
Gearcase Lube
Polaris Synthetic
OW-50 Oil
Polaris All Season Grease
Polaris ATV
Angle Drive Fluid
To Next Page
Loading...
