Chapter 4-Additional Conferencing Information
Polycom, Inc. 4-31
* System Flag = FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE
Recording Link Encryption
Recording Links are treated as regular participants, however the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF System Flag must
be set to YES if a non-encrypted Recording Link is to be allowed to connect to an encrypted
conference.
Table 4-13 summarizes the connection possibilities for a Recording Link that is to be
connected to a conference for each of the conference profile and Entry Queue encryption
options.
Encryption Flag Settings
To modify the Encryption flags:
1 Click Setup>System Configuration.
The System Flags dialog box opens.
Encrypt When
Possible
Move succeeds,
connected
encrypted
Move succeeds,
connected
encrypted
Move succeeds,
connected non-
encrypted
Connected only
if endpoint was a
defined
participant in the
source
conference.
Otherwise, move
fails.
Table 4-13 Connections by Recording Link and Conference Encryption Settings
Conference
Profile Setting
Recording Link Connection Status according to flag:
ALLOW_NON_ENCRYPT_RECORDING_
LINK_IN_ENCRYPT_CONF
YES NO
Encrypt All
Connected encrypted if possible,
otherwise connected non-
encrypted.
Connected only if encrypted,
otherwise disconnected
No Encryption Connected non-encrypted Connected non-encrypted
Encrypt when possible
Connected encrypted if possible,
otherwise connected non-
encrypted.
Connected encrypted if possible,
otherwise connected non-
encrypted.
Table 4-12 Moving Participants from the Entry Queue to the Destination conference or between
conferences Based on the Encryption Settings (Continued)
Destination
Conference
Encryption Setting
Current Participant Encryption Status
Encrypted Non-Encrypted
*Flag = NO *Flag = YES *Flag = NO *Flag = YES
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
Need help?
General
