Polycom RMX 1800 - Manually Adding and Deleting System Flags

Polycom® RMX 1800 Administrator’s Guide
20-10 Polycom, Inc.
7 Click OK to close the System Flags dialog box
Manually Adding and Deleting System Flags
To add a flag:
1 In the System Flags dialog box, click the New Flag ( ) button.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The following flags can be manually added to the
MCMS_PARAMETERS tab:
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server (RMX)” on page 19-54.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS
Flag Description
802_1X_CERTIFICATE_MO
DE
Not Supported in RMX 1800.
802_1X_SKIP_CERTIFICAT
E_VALIDATION
Not Supported in RMX 1800.
802_1X_CRL_MODE Not Supported in RMX 1800.
802_FIPS_MODE Not Supported in RMX 1800.
ACCEPT_VOIP_DTMF_TYP
E
Defines the type of DTMF tones (inband) or digits (outband)
that the Collaboration Server will accept in VOIP calls.
Range:
• 0 - Auto (default):
Inband or outband DTMF tones/digits are accepted
depending on the endpoint's current setting. If the
endpoint switches from inband to outband or visa versa
the value of the SET_DTMF_SOURCE_DIFF_IN_SEC
flag determines the time interval after which both inband
and outband tones/digits will be accepted.
• 1 - Outband (H.245) only
• 2 - Inband only
Download from Www.Somanuals.com. All Manuals Search And Download.