Polycom® RMX 1800 Administrator’s Guide
6-4 Polycom, Inc.
Creating a New Meeting Room
To create a new meeting room:
>> In the Meeting Rooms pane, click the New Meeting Room button or right-click an
empty area in the pane and then click New Meeting Room.
The New Meeting Room dialog box is displayed.
The definition procedure is the same as for the new conference.
For more information, see the Polycom RMX 1800 Getting Started Guide, "Starting a
Conference from the Conferences Pane” on page 3-12.
Delete Meeting Room Select any Meeting Room and then click this button to
delete the Meeting Room.
Table 6-3 Meeting Room Toolbar and Right-click Menus
Toolbar
button
Right-click menu Description
Dial out to AVC participants assigned to a Meeting Room will only start when the dial in participant
who has activated it has completed the connection process and the Meeting Room has become an
ongoing conference.
If SIP Factories are being used do not assign a Meeting Room the ID 7001. This ID is reserved for
the default SIP Factory.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
Need help?
General
