Polycom RMX 1800 - Starting the RMX Manager Application

Chapter 18-RMX Manager Application
Polycom, Inc. 18-3
The installation completes, the application loads and the RMX Manager - MCUs screen
is displayed.
The first time you start the RMX Manager application, the MCUs pane is empty.
Starting the RMX Manager Application
Once installed, the RMX Manager can be run using the http:// (non-secured) or https://
(secured) command in the browser’s address line or the Windows Start menu.
To use the browser:
1 In the browser’s command line, enter:
http://<MCU Control Unit IP Address>/RMXManager.html
or
https://<MCU Control Unit IP Address>/RMXManager.html
2 Press Enter.
To use the Windows Start menu:
1 Click Start > Programs.
a If the RMX Manager is displayed in the recently used programs list, click RMX
Manager in the list to start the application.
or
b Click All Programs > Polycom > RMX Manager.
MCUs Pane
MCUs Toolbar
Download from Www.Somanuals.com. All Manuals Search And Download.