Polycom RMX 1800 - System Configuration Flags; Modifying System Flags

Polycom, Inc. 20-1
20
System Configuration Flags
The system’s overall behavior can be configured by modifying the default values of the
System Flags.
Modifying System Flags
To modify system flags:
1 On the Collaboration Server menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the
MCMS_PARAMETERS tab, the following flags can be modified:
• For flag changes (including deletion) to take effect, the MCU must be reset. For more
information, see "Resetting the Collaboration Server (RMX)” on page 19-54.
• ENABLE_SELECTIVE_MIXING
Table 20-1 System Flags – MCMS_PARAMETERS
Flag Description
ALLOW_NON_ENCRYPT_P
ARTY_IN_ENCRYPT_CONF
If YES, allows non-encrypted participants to connect to
encrypted conferences.
Default: No
Download from Www.Somanuals.com. All Manuals Search And Download.