Polycom RMX 1800 User Manual

Polycom® RMX 1800 Administrator’s Guide
15-34 Polycom, Inc.
Volume Control of IVR Messages, Roll Call and Music
The volume of IVR music, and IVR messages is controlled by the following system flags:
• IVR_MUSIC_VOLUME
• IVR_MESSAGE_VOLUME
To control the volume of IVR music, Roll Call and messages:
>> Modify the values of the System Flags listed in Table 15-13 by clicking the menu Setup >
System Configuration.
If these flags do not appear in the System Flags list, they must be manually added.
For more information see "System Configuration Flags” on page 22-1.
Table 15-13 System Flags – IVR Volume Control
Flag Description
IVR_MUSIC_VOLUME The volume of the IVR music played when a single participant is
connected to the conference varies according to the value of this
flag.
Possible value range: 0-10 (Default: 2).
0 – disables playing the music
1 – lowest volume
10 – highest volume
IVR_MESSAGE_VOLUME The volume of IVR messages varies according to the value of this
flag.
Possible value range: 0-10 (Default: 2).
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Note:
It is not recommended to disable IVR messages by setting the
flag value to 0.
The following System Flags do not require an MCU reset:
• IVR_MESSAGE_VOLUME
• IVR_MUSIC_VOLUME
For all other flag changes, the MCU must be reset for the modified flag settings (including deletion)
to take effect.
Download from Www.Somanuals.com. All Manuals Search And Download.

Polycom RMX 1800 Specifications

General

Brand	Polycom
Model	RMX 1800
Category	Server
Language	English