Polycom® RMX 1800 Administrator’s Guide
20-12 Polycom, Inc.
DISABLE_DUMMY_REGIST
RATION
Enables or disables SIP dummy registration on the domain.
Possible Values:
NO (Default) - Disables SIP dummy registration.
YES - Enables SIP dummy registration.
Note: For homologation and certification testing, the flag must
be set to YES.
DTMF_FORWARD_ANY_DI
GIT_TIMER_SECONDS
Used for DTMF code suppression in cascading conferences.
Determines the time period (in seconds) that MCU A will
forward DTMF inputs from conference A participants to MCU
B.
Flag range (in seconds): 0 - 360000
This flag is defined on MCU A (the calling MCU).
For more information, see"Video Layout in Cascading
conferences (CP and mixed CP and SVC)” on page 5-1.
ENABLE_EPC When set to YES (default), enables Polycom proprietary
People+.
When set to NO, disables this feature for all conferences and
participants.
ENABLE_FLOW_CONTROL
_REINVITE
Used to enable or disable sending a re-INVITE to endpoints to
adjust their data rate. When set to YES, re-INVITE is used for
endpoints that do not support flow control in SIP using either
the Information or RTCP Feedback mechanisms.
Default: NO.
ENABLE_H239 When set to YES, Content is sent via a separate Content
channel. Endpoints that do not support H.239 Content sharing
will not be able to receive
When set to NO, the Content channel is closed. In such a
case, H.239 Content is sent via the video channel (“people”
video) enabling endpoints that do not support H.239 Content
sharing to receive the Content in their video channel.
Default: YES.
ENABLE_H239_ANNEX_T In H.239-enabled MIH Cascading, when MGC is on level 1,
enables sending Content using Annex T.
ENABLE_SELECTIVE_MIXI
NG
Enables (default) or disables the Automatic muting of noisy
AVC endpoints. For more details, see "Permanent
Conference” on page 4-48.
When set to YES, the automatic muting of noisy endpoints
can be enabled or disabled at the conference level in the
Conference Profile - Audio Settings dialog box.
When set to NO, the automatic muting of noisy endpoints is
disabled at the conference level and cannot be enabled in the
Conference Profile - Audio Settings dialog box.
Default: YES
Note: MCU reset is not required when changing the flag
value.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
