Polycom RMX 1800 - Page 504

Polycom RMX 1800 Administrator’s Guide
C-18 Polycom, Inc.
Identification
Method
Note: This field is only relevant to dial-in participants.
The method by which the destination conference is identified, as follows:
1 - Called IP address or alias
2 - Calling IP address or alias
Meet Me Method Note: This field is only relevant to dial-in participants.
The meet-me per method. Currently the only value is:
3 - Meet-me per participant
Table C-14 Event Fields for Events 2010, 2011, 2015 - DEFINED PARTICIPANT CONTINUE 1,
USER ADD PARTICIPANT CONTINUE 1, USER UPDATE PARTICIPANT CONTINUE 1
Field Description
Network Type The type of network between the participant and the MCU, as follows:
2 - H.323
5 - SIP
H.243 Password Not supported.
This field remains empty.
Chair Not supported.
Always contains the value 0.
Video Protocol The video protocol used by the participant, as follows:
1 - H.261
2 - H.263
4 - H.264
255 - Auto
Broadcasting
Volume
The broadcasting volume assigned to the participant.
The value is between 1 (lowest) and 10 (loudest).
Each unit movement increases or decreases the volume by 3 dB.
Undefined
Participant
Indicates whether are not the participant is an undefined participant, as
follows:
0 - The participant is not an undefined participant.
2 - The participant is an undefined participant.
Node Type The node type, as follows:
0 - MCU
1 - Terminal
Bonding Phone
Number
Video Bit Rate The video bit rate in units of kilobits per second.
A value of 4294967295 denotes auto, and in this case, the rate is computed
by the MCU.
Table C-13 Event Fields for Events 10, 101, 105 - DEFINED PARTICIPANT, USER ADD
PARTICIPANT, USER UPDATE PARTICIPANT (Continued)
Field Description
Download from Www.Somanuals.com. All Manuals Search And Download.