Polycom SoundStructure C12 User Manual

Using Events, Logic, And IR
9 - 27
In this event, every time the PTT button is closed, the clink_mute parameter
will be toggled.
To mute the microphones based on clink_mute, another event is required that
will map clink_mute to the mute of the “Mics” group.
The Clink_mute to Mics Mute event take the clink_mute state of device 1 and
maps that value to the mute state of the Mics group. Now whenever the PTT
microphone button is pushed, the clink_mute parameter will toggle and any
change in the clink_mute parameter will be mapped directly to the mute state
of “Mics” causing all microphones in the “Mics” group to be muted.

Polycom SoundStructure C12 Specifications

General

Brand	Polycom
Model	SoundStructure C12
Category	Conference System
Language	English