Command Protocol Reference Guide
A - 155
device. Index 1 corresponds to the phantom power supply on mic inputs 1-4,
index 2 corresponds to the phantom power supply on mic inputs 5-8, and so
on.
dev_volt_pos_15
+15 V Supply Voltage
Description
This parameter returns the voltage (in Volts) of the +15 V power supply.
sys_cmd_log_en
Enable/disable reporting of cmd/ack in logs
Description
This parameter controls whether commands and acknowledgements are
reported in the system logs.
sys_factory_reset
Restore System To Factory Settings
Argument Argument value
Channel Type Device-Specific System
Value Type Floating-Point
Read/Write Mode Read-Only
System Limits Minimum: 0.0, Maximum: 14.8, Resolution: 0.1
Event Source No
Argument Argument value
Channel Type Global System
Value Type Boolean
Read/Write Mode Read/Write
Default 1
Event Source No
Argument Argument value
Channel Type Global System
Value Type Void
Read/Write Mode Write-Only
Event Source No
To Next Page
Loading...
Need help?
General
