Polycom VVX 400 - Enabling Headset Memory Mode; Responding to Incoming Calls

34
This feature is useful for permanent or full-time headset users. You can set up your phone
so that all incoming and outgoing calls use your headset. At any time, you can switch to
handset or speakerphone mode.
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode.
When Headset Memory Mode is activated, flashes either green (for analog headsets) or
blue (for USB or Bluetooth headsets).
Enabling Headset Memory Mode
Select Settings from Home view, and select Basic > Preferences > Headset > Headset
Memory.
1
To enable Headset Memory Mode :
From the Headset Memory Mode screen, select Enabled.
2
Press
3
To activate Headset Memory Mode, press twice. The Headset key will flash to indicate
that the phone is in Headset Memory Mode.
4
Now, whenever you answer a call, the call will connect to your headset automatically.
If you switch to the speakerphone or the handset, you deactivate Headset Memory Mode.
Calls will no longer automatically go to your headset, unless you choose this mode. To
have calls go to your headset again, activate Headset Memory Mode by pressing twice.
Temporarily ignore the call before answering it.
Reject the call so it goes directly to voicemail.
Forward the call to another person.
While your phone rings, you can do the following :
Responding to Incoming Calls