Polycom VVX 400 - Updating Paging Group Subscriptions; Allowing Pages to Play During Active Calls

79
2
From the Group Paging Configuration screen, select Default Group, and select a new
paging group number. The default paging group is 1.
Updating Paging Group Subscriptions
By default, you’re subscribed to Paging Groups 1, 24, and 25. This means that you can send
pages to and receive pages sent to these groups. You can change which groups you’re subscribed
to. However, you can’t disable your subscriptions to Paging Groups 24 and 25.
Select Settings from Home view, and select Basic > Preferences > Paging/PTT
Configuration > Group Paging.
From the Group Paging Configuration screen, select Group Subscriptions.
From the Group Subscriptions screen, select the group you want to subscribe to,
and press Yes.
To update your Paging Group subscriptions :
1
2
3
Allowing Pages to Play During Active Calls
The Accept While Busy option determines what happens when you’re in a call and receive a
page. If you enable the option, a page will interrupt telephone calls and you’ll hear the audio
of both the telephone call and the page. If you disable the option, the incoming page will be
held in a Pending state—it won’t disrupt the telephone call, and you won’t hear the page. To
hear the page, tap the page and press Accept (the telephone call will automatically be held).
Or, hold or end the telephone call.
Select Settings from Home view, and select Basic > Preferences > Paging/PTT
Configuration > Group Paging.
From the Group Paging Configuration screen, scroll to Accept While Busy, and enable
or disable the setting.
The default setting is Disabled. When enabled, your phone will accept and play pages
while you’re in an active call. When disabled, your phone won’t play pages while you’re
in a call, but will hold them as
Pending instead.
To allow or disallow pages to play during an active call :
1
2