www.poolpak.com | 800-959-772562 | MPK Series - Installation, Operation and Maintenance
The below is a listing of the Analog Inputs and their related default values:
• Sply Fan Cur - Supply Fan Current - Tol = 005.0, Min = 000.0, Max* = 200.0 (Applies to D cabinets (VFDs) only.)
*Max value must match actual maximum value in VFD
• Exh Fan Cur - Exhaust Fan Current - Tol = 005.0, Min = 000.0, Max* = 200.0 (Applies to D cabinets (VFDs) only.)
*Max value must match actual maximum value in VFDr
• Pur Fan Cur - Purge Fan Current - Tol = 005.0, Min = 000.0, Max = 200.0 (Applies to D cabinets (VFDs) only.)
*Max value must match actual maximum value in VFD
• Rtn Air Temp - Return Air Temperature - Min = 025.0, Max = 130.0
• Out Air Temp - Outside Air Temperature - Min = -040.0, Max = 150.0
• Off Evap Temp - Air Off the Evaporator Temperature - Min = -040.0, Max = 150.0
• Surf Temp - Surface or Cold Wall Temperature - Min = 000.0, Max = 130.0
• Sply Air Tmp - Supply Air Temperature - Min = 000.0, Max = 250.0
• Rtn Air RH - Return Air Relative Humidity - Tol = 010.0, Min = 000.0, Max = 100.0
• Outs Air RH - Outside Air Relative Humidity - Tol = 010.0, Min = 000.0, Max = 100.0
• Air Off Evp RH - Air Off the Evaporator Relative Humidity - Tol = 010.0, Min = 000.0, Max = 100.0
• Rcrc Dpr Fbk - Recirculation Air Damper Feedback - Tol = 005.0, Min = -025.0, Max = 100.0
• Outs Dpr Fbk - Outside Air Damper Feedback - Tol = 005.0, Min = -025.0, Max = 100.0
• EvapBypDpr Fbk - Evaporator/Bypass Damper Feedback - Tol = 005.0, Min = -025.0, Max = 100.0
• RtnFltrPD - Return Air Filter Pressure Drop - Tol = 0.500, Min = 0.000, Max = 2.000
• OutFltrPD - Outside Air Filter Pressure Drop - Tol = 0.500, Min = 0.000, Max = 2.000
• ExhAirFlow - Exhaust Air Flow - Tol = 005.0, Min = 000.0, Max = 025.0
Airflow: K Fac = 97.0, RPMOvrVal = 0000, FanDOOvrVal = AUTO
• OutAirVol - Outside Air Volume - Tol = 005.0, Min = 000.0, Max = 043.0
• SupAirFlow - Supply Air Flow - Tol = 005.0, Min = 000.0, Max = 025.0
Airflow: K Fac = 429.1, RPMOvrVal = 0000, FanDOOvrVal = AUTO
• PurAirFlow - Purge Air Flow - Tol = 005.0, Min = 000.0, Max = 025.0
Airflow: K Fac = 194.1, RPMOvrVal = 0000, FanDOOvrVal = AUTO
• Rtn Air CO2 - Return Air CO2 Level - Tol = 0100, Min = 0000, Max = 2000
• Spc Air Prs - Space Air Pressure - Tol = 0500, Min = -1000, Max = 1000
• Pool 1 Temp - Pool 1 Water Temperature - Tol = 010.0, Min = 010.0, Max = 150.0
• Pool 2 Temp - Pool 2 Water Temperature - Tol = 010.0, Min = 010.0, Max = 150.0
• PoolA Wtr PD - Water Pressure Drop for condenser section “PoolA” (ft of water)
Tol = 005.0, Min = 000.0, Max = 069.2
• PoolB Wtr PD - Water Pressure Drop for condenser section “PoolB” (ft of water)
Tol = 005.0, Min = 000.0, Max = 069.2
To Next Page
