Powtran PI8600 Series User Manual

Section V Parameter Function Table
43
Section V
address
This Inverter communication address: it is the only code to differentiate from other inverters.
Setting range “1~127” is slave inverter address, that can receive command and send out this
inverter state. Seeing attachment 1 for detailed specification.
The proportion of linkage function:
The proportion of linkage host inverter:
This inverter communication address=128,
Communication interface A is set as host inverter communication interface for proportion of
linkage.
Communication interface B can be treated as keyboard interface or “PC” Host Computer
Interface.
The proportion of linkage slave inverter:
This inverter communication address =1~127,
Communication interface A and B both can be set as communication interface of slave
inverter for the proportion of linkage.
Seeing appendix 2 for detailed specification.
A29
Baud rate
Baud rate is 1200
0
-
4
Y
Baud rate is 2400
1
Baud rate is 4800
2
Baud rate is 9600
3
Baud rate is 19200
4
Baud rate is 38400
5
This parameter only change the communication port A baud rate. Communication port B
baud rate is fixed at 19200bps.
A communication port using the onboard keypad (factory standard).
Onboard keyboard default 19200bps, do not change.
A communications port to use isolation RS485/Rs232 communication card (optional).
May need to change
A30
Communication format
8
，
N
，
1 for RTU
0
-
0
Y
8
，
N
，
2 for RTU
1
8，E，1 for RTU
2
8
，
O
，
1 for RTU
3
8，E，2 for RTU
4
8，O，2 for RTU
5
Seeing attachment for detailed specification.
A31
Communications
troubleshooting
N warning for
communication fault
0
-
0
Y
Warning and running
1
Warning and decelerating
stop
2
Warning and free stopping
3

Powtran PI8600 Series Specifications

General

Brand	Powtran
Model	PI8600 Series
Category	Inverter
Language	English