Service manual contents
The service manual contains information to service, repair, troubleshoot, and maintain the
machine base.
This manual does not include console service and repair information, refer to the console
service manual for service and repair information. However, the service manual does
include information about how to use the console standard service menus, diagnostic tests,
and error code log to help troubleshoot and repair machine issues.
Common Frame Update
Precor has implemented a new common frame weldment starting 05/14/2019 that is used
on the TRM600, TRM700, and TRM800 Experienceâ„¢ Series treadmills. This manual will
provide separate service information for both the original "Legacy" frame and new "Com-
mon" frame" configurations. For more detailed information, see "TRM600/700/800 Common
Frame Overview" on page286.
Additional Service Documentation and Videos
There are additional literature and video resources available that can help you to use, ser-
vice, troubleshoot, and repair the machine. Refer to Product Literature & Videos topic:
l "Product Literature & Videos" on page299
See Also
"General Information" on page6
"Product Literature & Videos" on page299
Safety Guidelines
"Operation Verification" on page24
"Standard Service Menus" on page28
"Adjustment Procedures" on page57
"Replacement Procedures" on page85
"Troubleshooting" on page221
"Preventive Maintenance (PM)" on page276
"Theory of Operation" on page283
"System Wiring Diagram" on page294
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 2
1 Introduction
Service manual contents
To Next Page
Loading...
Need help?
General