MC Status Light
The MC status light is located on the left side of the MC housing.
ASL State DESCRIPTION
Green Normal operation.
Yellow Indicates a fault condition has occurred, go to the Error Log or CPA
1
Event Log to view the current error codes (see "Error Log & CPA Event
Log" on page230 and the Error Code Troubleshooting Guide). To reset
the MC status light, first repair the error condition and then clear the
error log. Recycle power and verify that the MC light has returned to
green.
*The TRM600 and P31 console do not support the MC status light.
1
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 131
6 Replacement Procedures
Motor Controller (MC) Replacement
To Next Page
Loading...
Need help?
General