Standard Error Codes
About
There is a set of standard error codes implemented across Precor cardio exercise equip-
ment. Error codes are system generated codes that identify specific machine fault con-
ditions. The maintenance software monitors error code event conditions, when a fault is
detected, the error code is generated and stored in the Error Log (or CPA
1
Event Log) along
with related machine metrics, such as, the machine mileage (or hours), the time, drive motor
current, etc.
Error code numbers range from 01 to 99. There are also a small number of alpha and alpha-
numeric codes. Most, but not all error codes are grouped into numeric ranges to help easily
identify common system issues. Refer to the Error Code Troubleshooting Guide for a com-
plete list of error codes and troubleshooting information.
IMPORTANT: Error code descriptions and troubleshooting information can be found
in the Error Code Troubleshooting Guide, see Error Code Guide Troubleshooting
Guide.
1
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 227
7 Troubleshooting
Standard Error Codes
To Next Page
Loading...
Need help?
General